Monsoon 
Service Australia Wide

Durable Irrigators,  Built for Australian Conditions 

Our goal is to ensure that you have a Quality system that is safe, reliable and cost-efficient for all of your applications. We are committed to providing customer satisfaction through accurate advice and quality products and service.

 

The best way to ensure your equipment performs at its optimal capacity is to regular maintain and service it. We have qualified professionals available to help keep you doing what you do best and your irrigator performing as it should. 

Contact us should you wish to set up a schedueld maintenance service, service call, installation or just need some friendly advice. 

WE NOW OFFER SCHEDULED MAINTENANCE

Tips to save you Time and Money

\

Regularly Change the gearbox oil  

\

Check alignment and adjustment of Drive gear and drum 

\

Check for water leaks near entry seals and gearbox

\

Replace worn lead screw bushes

Maintenance Tips

  • Grease the two (2) Drum Hub Supports by means of suitable industrial lubricating grease. (We suggest Penrite Hi Temp Grease or an equivalent).
  • Control the oil level of the gearbox. 
  • Use specific oil for Gear Box suitable for working temperatures and pressures.           
  • (We suggest Penrite – EP320 gear oil or an equivalent).
  • Grease the Disengagement Linkages by means of suitable industrial lubricating grease. (We suggest Penrite Hi Temp Grease or an equivalent).
  • Grease the Pinion Gear by means of suitable industrial lubricating grease. (We suggest Penrite Hi Temp Grease or an equivalent).
  • Lubricate the chain on the Lead Screw by means of spray oil specific for chains without O-ring’s.
  • Grease the Lead Screw of the Hose Guide by means of suitable industrial lubricating grease. (We suggest Penrite Hi Temp Grease or an equivalent).
  • Lubricate the Chain of the hydraulic Turntable by means of spray oil specific for chains without O-ring’s.
  • Grease the three (3) remote “Grease Points” by means of suitable industrial lubricating grease. (We suggest Penrite Hi Temp Grease or an equivalent).
  • Grease Turntable by means of grease gun and suitable industrial lubricating grease. (We suggest Penrite Hi Temp Grease or an equivalent).
  • Check tyre pressure on Irrigator tyres(should be 70 psi)
  • Grease bearings by means of suitable industrial lubricating grease. (We suggest Penrite Hi Temp Grease or an equivalent).
  • Check tyre pressure on Trolley tyres (should be 30 psi)
  • Replace Water Entry Seal, O’rings and Thrust Washer every twelve (12) months or as soon as leaks occur
  • Use silicon grease on outside of seal
  • Please note the circlip may also need replacing
  • Lead Screw Bushes need to be replaced every twelve (12) months or as soon as excessive wear occurs (i.e. when there is more than 25mm movement each way)
  • Oil should be completely changed at the start of each irrigation season or every twelve (12) months.

 

(02) 6652 5264

 

8 Buckman Close Toormina NSW 2452

 

  • This field is for validation purposes and should be left unchanged.

© Monsoon Irrigators Australia 2019 ALL RIGHTS RESERVED | ADMIN | WEBSITE BY CRUSH STUDIOS